Yellow Jacket 60295 Eccentric Cone Flaring Tool, 3/16"-3/4" (OD) Nominal Capacity, 45 Degrees Flare Angle, Soft Copper, Aluminum, Eccentric Cone, Feed Screw, Steel (Flaring Bars), Hardened Steel (Cone), Heat-Treated Steel

Applicable Materials	:	Soft Copper, Aluminum
Body Material	:	Steel (Flaring Bars), Hardened Steel (Cone)
Finish	:	Black Oxide (Flaring Bars)
Flare Angle	:	45 degrees
Flare Type	:	45° Flare
Handle Type	:	Feed Screw
Height	:	4 "
Jaw Material	:	Heat-Treated Steel
Jaw Size	:	3/16" - 3/4" (O.D.)
Nominal Capacity	:	3/16"-3/4" (OD)
Style	:	Eccentric Cone
Suitable For Use With	:	Soft Copper Tubing, Aluminum Tubing, HVAC/R Systems, R-410A Fittings, A2L Refrigerant Systems

Yellow Jacket Eccentric Cone Flaring Tool, 3/16"-3/4" (OD) Nominal Capacity, 45 Degrees Flare Angle, Soft Copper, Aluminum, Eccentric Cone, Feed Screw, Steel (Flaring Bars), Hardened Steel (Cone), Heat-Treated Steel, Black Oxide (Flaring Bars), 4" Height

Off-center hardened steel cone produces a rolling action for uniform 45° flare walls without galling.Flares 3/16" to 3/4" O.D. soft copper and aluminum tubing.Large feed screw handle allows for smooth turning with minimal effort.Heat-treated, black oxide-finished steel flaring bars ensure durability and a secure grip on tubing.Built-in clutch release prevents over-torquing for consistent results.Suitable for high-pressure systems, including those using R-410A and A2L refrigerants.Includes Yellow Jacket Flare Sizing Gauge (P/N 60297) for verifying proper flare dimensions.