TEMPSTAR® RGS Series RGS120HDCA0AAA Cooling Unit, 120000 Btu/hr Cooling, 180000 to 250000 Btu/hr Heating Input, 48.5 A

TEMPSTAR® RGS Series RGS120HDCA0AAA Cooling Unit, 120000 Btu/hr Cooling, 180000 to 250000 Btu/hr Heating Input, 48.5 A

TEMPSTAR® RGS Series RGS120HDCA0AAA Cooling Unit, 120000 Btu/hr Cooling, 180000 to 250000 Btu/hr Heating Input, 48.5 A

Brand: TEMPSTAR®
Part #: 12497
Customer Part #:
Additional Information      :      Single Package, Rooftop, Gas Heat/Electric
Amperage Rating      :      48.5 A
CFM Rating      :      5000 cfm
Compressor Type      :      Scroll
Decibel Rating      :      69.3 dBA
Dimensions      :      88-1/8 in L x 59-1/2 in W x 49-3/8 in H
Drain Connection      :      3/4 in
EER Rating      :      11.1
Finish      :      Pre-Painted
Frequency Rating      :      60 Hz
HP Rating      :      1/4 hp
Input BTU Rating      :      120000 Btu/hr Cooling, 180000 to 250000 Btu/hr Heating
Number of Stages      :      2
Phase      :      3 ph
Refrigerant Type      :      R-410A
Rotational Speed      :      1100 rpm
Series      :      RGS Series
Tonnage      :      10 ton
Voltage Rating      :      208/230 VAC
Wattage      :      10.3 kW

TEMPSTAR® Cooling Unit, RGS Series, Input BTU Rating: 120000 Btu/hr Cooling, 180000 to 250000 Btu/hr Heating, 208/230 VAC, 48.5 A, 10.3 kW Wattage, 1/4 hp, 1100 rpm Rotational Speed, 60 Hz, 3 ph Phase, Scroll Compressor, 5000 cfm, 11.1 EER Rating, Tonnage: 10 ton, 2 Stages, R-410A Refrigerant, 69.3 dBA Decibel, 3/4 in Drain Connection, Finish: Pre-Painted, 88-1/8 in L x 59-1/2 in W x 49-3/8 in H, Additional Information: Single Package, Rooftop, Gas Heat/Electric

  • High efficiency gas heating and electric cooling with a low profile, prewired, tested and charged at the factory
  • Field convertible from vertical to horizontal air flow
  • Full perimeter base rail with built-in rigging adapters and fork truck slots
  • Pre-painted exterior panels and primer-coated interior panels tested to 500 hr salt spray protection
  • Fully insulated cabinet
  • Redundant gas valve, up to two-stage of heating
  • Exclusive IGC solid-state gas controller for on-board diagnostics with LED error code designation, burner control logic and energy saving indoor fan motor delay
  • High efficiency, gas heat with induced draft flue exhaust design
  • Scroll compressors with internal line break overload protection
  • Refrigerant circuits contain a liquid line filter drier to trap dirt and moisture
  • Indoor and outdoor coils constructed of aluminum fins mechanically bonded to seamless copper tubes
  • Exclusive non-corrosive composite condensate pan in accordance with ASHRAE 62 standard, sloping design, side or center drain
  • Belt drive evaporator fan motor and pulley combinations
  • Dual compressors
  • Low heat
  • Medium static motor (5 - 15 ton)
  • Aluminum/copper condenser and evaporator coil
  • Original design digit A

back To Top