This is an alert about new products, services, trainings, jobs, weather, sales, holidays, closings, etc.
AFUE Rating | : | 80 to 81 % |
Additional Information | : | Single Package, Rooftop, Gas Heat/Electric |
Amperage Rating | : | 41.1 A |
CFM Rating | : | 3750 cfm |
Compressor Type | : | Scroll |
Configuration | : | Evaporator Coil - 11.1 sq-ft Face Area, 15 Fins/in, Condenser Coil - 25.1 sq-ft Face Area, 17 Fins/in |
Decibel Rating | : | 65.1 dBA |
Dimensions | : | 88-1/8 in L x 59-1/2 in W x 41-1/4 in H |
Drain Connection | : | 3/4 in |
Drive Type | : | Belt |
EER Rating | : | 11 |
Finish | : | Pre-Painted |
Frequency Rating | : | 60 Hz |
HP Rating | : | 1/4 hp |
Ignition Type | : | Direct Spark |
Input BTU Rating | : | 90000 Btu/hr Cooling, 125000 to 224000 Btu/hr Heating |
Number of Stages | : | 2 |
Phase | : | 3 ph |
Refrigerant Type | : | R-410A |
Rotational Speed | : | 1100 rpm |
Series | : | RGS Series |
Tonnage | : | 7.5 ton |
Voltage Rating | : | 208/230 VAC |
Wattage | : | 7.5 kW |
TEMPSTAR® Cooling Unit, RGS Series, Input BTU Rating: 90000 Btu/hr Cooling, 125000 to 224000 Btu/hr Heating, 208/230 VAC, 41.1 A, 7.5 kW Wattage, 1/4 hp, 1100 rpm Rotational Speed, 60 Hz, 3 ph Phase, Scroll Compressor, Evaporator Coil - 11.1 sq-ft Face Area, 15 Fins/in, Condenser Coil - 25.1 sq-ft Face Area, 17 Fins/in, 3750 cfm, 11 EER Rating, 80 to 81 % AFUE Rating, Tonnage: 7.5 ton, 2 Stages, R-410A Refrigerant, 65.1 dBA Decibel, Direct Spark Ignition, Belt Drive, 3/4 in Drain Connection, Finish: Pre-Painted, 88-1/8 in L x 59-1/2 in W x 41-1/4 in H, Additional Information: Single Package, Rooftop, Gas Heat/Electric
- High-efficiency gas heating and electric cooling with a low profile, prewired, tested and charged at the factory
- Field convertible from vertical to horizontal air flow
- Full perimeter base rail with built-in rigging adapters and fork truck slots
- Pre-painted exterior panels and primer-coated interior panels tested to 500 hr salt spray protection
- Fully insulated cabinet
- Redundant gas valve, up to two-stage of heating
- Exclusive IGC solid-state gas controller for on-board diagnostics with LED error code designation, burner control logic and energy saving indoor fan motor delay
- High-efficiency, gas heat with induced draft flue exhaust design
- Scroll compressors with internal line break overload protection
- All units have high/low pressure switches
- 2 in disposable fiberglass-type return air filters in dedicated rack with tool less filter access door
- Refrigerant circuits contain a liquid line filter drier to trap dirt and moisture
- Indoor and outdoor coils constructed of aluminum fins mechanically bonded to seamless copper tubes
- Newly - designed indoor refrigerant header for easier maintenance and replacement
- Exclusive non-corrosive composite condensate pan in accordance with ASHRAE 62 standard, sloping design, side or center drain
- Belt drive evaporator fan motor and pulley combinations
- Access panels with easy grip handles provide quick and easy access to the blower and blower motor, control box and compressors
- No-strip screw system has superior holding power and guides screws into position while preventing the screw from stripping the units metal
- Newly - designed terminal board facilitates simple safety circuit troubleshooting and simplified control box arrangement
- Outdoor temperature cooling operation range up to 115 deg F and down to 25 deg F using winter start kit