This is an alert about new products, services, trainings, jobs, weather, sales, holidays, closings, etc.
| ItemApplicationCompatibilities_en | : | Incandescent, Fluorescent, CFL, LED |
| ItemColor_en | : | Silver |
| ItemCountdownTime_en | : | 6 hrs |
| ItemHoldModeIncludedCVL_en | : | No |
| ItemInWallWiringConfigurations_en | : | Single |
| ItemIncludesWallPlateCVL_en | : | Yes |
| ItemInputVoltageRanges_en | : | 125-277 VAC, 50/60 Hz |
| ItemMarket_en | : | Commercial, Residential |
| ItemMechanismType_en | : | Analog/Mechanical |
| ItemMotorLoadRatingsRanges_en | : | 1 HP, 125 VAC, 2 HP, 250 VAC |
| ItemNeutralConnectionRequiredCVL_en | : | No |
| ItemOperatingTemperatureMaxC | : | 49 |
| ItemOperatingTemperatureMaxF | : | 120 |
| ItemOperatingTemperatureMinC | : | 4 |
| ItemOperatingTemperatureMinF | : | 40 |
| ItemOperationMode_en | : | Countdown |
| ItemProductDepthIn | : | 1.25 |
| ItemProductDepthMm | : | 31.8 |
| ItemProductHeightIn | : | 4.125 |
| ItemProductHeightMm | : | 104.8 |
| ItemProductWidthIn | : | 1.75 |
| ItemProductWidthMm | : | 44.5 |
| ItemResistiveHeater_en | : | 20 A, 2500 W, 125 VAC, 10 A, 2500 W, 250 VAC, 10 A, 2770 W, 277 VAC |
| ItemSwitchType_en | : | DPST |
| ItemTungstenIncandescentRanges_en | : | 7 A, 125 VAC, 50/60 Hz, 875 W |
| ItemTungstenIncandescent_en | : | 7 A, 125 VAC, 50 Hz, 7 A, 125 VAC, 60 Hz, 875 W |
| ItemWallPlateConfiguration_en | : | Single-Gang, Multi-Gang |
The FF Series Commercial Countdown Timers are designed to replace any standard wall switch and do not require electricity to operate. These energy-efficient switches automatically limit the ON times for fans, lighting, motors, heaters, and other energy consuming loads. A commercial "brushed metal" look plate (plastic construction) meets NEC requirements. *NOTE: Not for use with sunlamps, saunas, or loads that could cause personal injury if timed incorrectly.
- 6-Hour timer
- DPST (Double-Pole Single-Throw)
- Breaks circuit at end of timing cycle
- No electricity required to operate
- Replaces any standard or decorator single-gang wall switch
- Automatically limits ON time for energy consuming loads
- Quick and easy installation
- Time-saving up front terminal connection with teeter-type terminals
- Brushed metal look switch plate meets NEC requirements (plate is included)
- Incandescent/fluorescent/CFL/LED compatible