| Additional Information | : | 180 W Power, 3.31 lb Weight, 8 in Duct, Corrosion-Resistant |
| Air Flow Capacity | : | 280 cfm |
| Amperage Rating | : | 1.23 A |
| Depth | : | 12 in |
| Filter Efficiency | : | 99.97 % |
| Finish | : | Pre-Painted |
| Frequency Rating | : | 60 Hz |
| Height | : | 22 in |
| Material | : | Steel |
| Phase | : | 1 ph |
| Pressure Rating | : | 0.4 in-WG |
| Voltage Rating | : | 120 V |
| Width | : | 17 in |
The HEPA Filtration system comes with two different mounting methods, depending on your choice of installation. The HS300 can be installed in a conditioned space such as a basement, closet or heated crawl space or because it is insulated it can also be installed in an unconditioned space such as a garage or attic. The HERO HS300 can be duct mounted or directly to any furnace/ air handler with a relay switch activating the unit on. Designed with a back plate that allows direct connection of the unit to air handler or furnace.
fantech® HEPA Filtration System, 17 in Width, 22 in Height, 12 in Depth, 1.23 A, 120 V, 60 Hz, 1 ph Phase, 280 cfm Air Flow Capacity, 99.97 % Filter Efficiency, Steel, Finish: Pre-Painted, 0.4 in-WG, Additional Information: 180 W Power, 3.31 lb Weight, 8 in Duct, Corrosion-Resistant
- 3-stage filtration: pre-filter with carbon, HEPA filter
- Captures 99.97% of particles 0.3 microns and larger
- Variable speed operation (200 or 300 cfm)
- No adverse effect on your forced-air system
- Fully insulated cabinet
- Recommended for homes up to 3000 sq. ft
- Duct-mounted (HERO HS300) and stand-alone (PHS300) models